Polaris Riders Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
229 Posts
Discussion Starter · #1 ·
Just wondering what jets everyone is running... those of you who have the K&N slip on. I have K&N slip on, WB pipe with 7 discs. jetting is 170 main with needls raised up 1 notch. It looks to be a little lean on the plug.. what are you all running??

Thanks a ton,
Sean
 

·
Registered
Joined
·
429 Posts
170 main and 50 pilot. Dropped the needle one clip to clean up a little hesitation off the stop. Be sure to let the Pred warm up real well. Mine runs like a POS until it gets up to temp.
 

·
Registered
Joined
·
1,935 Posts
im running a 162.5, but stock pipe its close, havent looked at the plug lately, was rich slightly with 165, and i clip moved on needle, agreed, let it warm up, mine stumbles like crazy till its warm, then get outta the way
 

·
Premium Member
Joined
·
1,055 Posts
I did try the 170 but it just worked best with a 167.5....just my opinion. Im at abotu sea level or whatever Glamis is cuz Im about 30 from there:)
 
1 - 5 of 5 Posts
Top