Polaris Riders Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,935 Posts
Discussion Starter · #1 ·
trided my first tt race this weekend, im hooked. i just loosened up my front and rear all the way to drop it and ran my stock tires, worked well on the inside of the track, loose stuff, but not so hot on the packed area. also the jump was brutal landing on bumpstops with no spring at all for front end. did ok, placed 7 out of 8 in the open class. now im wondering what anyone has done to run theirs as a tt racer, im ready to convert, satruday tt raced, then sunday mx raced and fractured a bone in my hand, and i still feel like i had my ass beat. id like to do something that i can set up to mx on occasions with friends, but mainly tt, any suggestions for front springs or tires?
 

· Registered
Joined
·
46 Posts
tighten your front shocks back near to stock leave the front right stiff and lossen your left one till its soft. dont loosen your rear shock all ther way down either just soften it enough to when you sit on it it squats more. I race tt and from the stock setting I loosened my front left 6 turns and left the right stiff and i loosened the rear just enogh till it squats but still has some spirng left and i do very well with that sit up i ruin open mod, open proam, and 25+ class and i always finish in the top 3
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top