Polaris Riders Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
315 Posts
I tightned mine to about 45ft lbs. Hey you could always snug em at 40 lbs since its right in the middle. Its no life or death situation there.
 

·
Registered
Joined
·
315 Posts
You would think that the swingarm would be right and the manual a misprint. As long as you arent bending the brackets then its doing no harm.
 

·
Registered
Joined
·
31 Posts
Anybody else have different size eccentric bolts? I ask cause my eccentric bolts are different sizes. One of my bolts is a 14mm bolt and one is a 15mm bolt? Same prob when I tried usin standard sizes, one 9/16 and one 5/8 or something. Which is right to use, metric or standard? Thanks guys
 

·
Registered
Joined
·
455 Posts
Excuse my french, but that bolt set up sucks. Mine are also different sizes. The bolt is a different size from the nut..."WTF is that all about??" LOL

One pinch bolt will not torque, it just keeps tighting down. Im taking it back to the dealer next weekend for that and those crappy ball joints. :)
 

·
Premium Member
Joined
·
804 Posts
Torque to 35 polaris made a mis print in manual if u go to 45 you will lose bearings in axle believe me has happened twice to me and once to my buddy
 

·
Registered
Joined
·
1,103 Posts
Yup, only to 35. They are standard nuts and bolts...when in doubt, just look at the markings on the heads.
 
1 - 9 of 9 Posts
Top