Polaris Riders Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
what's ideal for front and rear sand tires??? is it 10-5???
 

·
Registered
Joined
·
429 Posts
What sand tires?
 

·
Registered
Joined
·
88 Posts
i ran 2 lbs on Gecko's they have a stiff side wall though compared to most
 

·
Registered
Joined
·
3,904 Posts
A Good Ave is about 3 PSI for rears......I would like to know what tires you are running though? TINA
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #5 ·
i have sand tires unlimited in front(razor backs) and sand skate II's in back...
 

·
Registered
Joined
·
3,904 Posts
well, to me ... I have done 2 PSI before but that is too low 3 is better IMO......
 

·
Registered
Joined
·
839 Posts
Run a minimum or 4 psi in the sand skate 2's or you will be constantly fighting leaky beads. They have a softer sidewall and rubber compound and taller blades than most sand tires and usually work better for high HP engines like the Predator, Banshee, Raptor etc. 5 psi in the front. I recently started running tubes in my sand tires because I got tired of constantly cleaning the sand out of the beads. Just a suggestion.
 
1 - 8 of 8 Posts
Top