Polaris Riders Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
have dynojet kit and just like to know how the stage 3 set-up works.. good or bad???..
better to use air box mods and no dynojet kit ???
or air box mods with dynojet kit??? or juat go for it and do stage 3 clamp-on filter and no air box??
 

·
Registered
Joined
·
993 Posts
do airbox mods and use the stage 3 dynojet as a starting point with the jetting. take a look at the uni-vents for you airbox mod, very easy to install and cheap to purchase.
 

·
Registered
Joined
·
57 Posts
air box mod what pie do you have if w/b add 4 disc or 3disc and quit core and about a 2x5 opening in air box. the only thing I have found better than that is a new carb. my edelbrock is better but that will be close. I have one with edelbrock and one with dynojet stage 3 both work well. just alot more torque with the edelbrock. you dont want to open the airbox to much or you will lose torque in which case you would be better off with clamp on air filter.
 
1 - 3 of 3 Posts
Top