Polaris Riders Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
839 Posts
Discussion Starter · #1 ·
Does anyone know what the pattern is on the '04 preadator rear hubs. I'm looking for 4/115 hubs. I know that there are 4/110 hubs available but I have alot of $ invested in Yamaha wheels already.
 

·
Registered
Joined
·
6 Posts
I just checked with everybody I could find and nobody made a 4/115 hub. The only way I found was to go with the TEAM axle and get the 4/115 hubs for it. Rath did say he has redrilled the 4/115 wheels for 4/110. Kevin
 

·
Registered
Joined
·
6 Posts
I just checked with everybody I could find and nobody made a 4/115 hub. The only way I found was to go with the TEAM axle and get the 4/115 hubs for it. Rath did say he has redrilled the 4/115 wheels for 4/110. Kevin
 

·
Premium Member
Joined
·
3,009 Posts
If you have a bunch of yammie wheels it might be worth it to look in to getting your wheels re-drilled for the 110 bolt pattern. The hard part is the indexing of the wheel, once, done the drilling goes fast!

It shouldn't be too hard to make up a drill templet to bolt on to your wheel to drill them.
 

·
Registered
Joined
·
839 Posts
Discussion Starter · #6 ·
Sounds like drilling is the only option other than getting a new axle. Thanks for the help.
 

·
Registered
Joined
·
149 Posts
I WAS LOOKING AT BUYING THE NEW HUB W/THE 4/110 HONDA PATTERN SO I COULD BUY SAME 9 INCH RIMS. HAD A SPARE SET OF SCRAMBLE HUBS JUST DIE GRID SOME OF THE INNER SPLINE TO MATCH THE PREDATOR ONES, (ABOUT A 1/4 OF AN INCH OF SPLINE TO REMOVE) AND THEY BOLT RIGHT ON. ITP HAS THE 4/4 PATTERN RIMS IN 8,9,10 INCH SO WHATEVER TIRE SIZE YOU'RE LOOKING FOR CAN BE FOUND.
 
1 - 7 of 7 Posts
Top