Polaris Riders Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
72 Posts
assuming you have the stock carb

-pull the top off of the carb and remove the diaphram
-blast all the soot out with carb cleaner
-make sure the air jet is clean

the slide works off vacuum so its important the top side of the carb is clean

also check out the sticky on the diy carb mod

i have an FCR now so i can't help you with jetting it.

when you get it right it'll rip your arms off. Good Luck
 
1 - 1 of 1 Posts
Top