Polaris Riders Forum banner
1 - 2 of 2 Posts

·
Registered
2008 Polaris Outlaw 525S HMF center pipe, Elka Legacy Series front and rear shockss
Joined
·
70 Posts
The left rear doesn't have bearings it is on a spline. It might be loose, check lugnuts and the spindle nut that hold the hub on.
 
  • Like
Reactions: Pred500troylee

·
Registered
2008 Polaris Outlaw 525S HMF center pipe, Elka Legacy Series front and rear shockss
Joined
·
70 Posts
The rear sprocket should not wobble. It should be bolted tight to the sprocket hub When you jack up the swing arm from the axle carrier does the axle wobble? Is the hub nut on the brake side loose?
 
1 - 2 of 2 Posts
Top