Polaris Riders Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
I am getting ready to make some mods to my predator and I need to know where to get the parts. I need a jet kit, where can I get one for the best price?? I'm bidding on a couple WB slip on silencers on ebay, so maybe I can get hooked up with one of those. I'm thinking about ordering the slip on K&N air filter, should I get the outerwear for it? I rarely ride in any kind of water, if any. I want to get the 38 tooth rear sprocket and the 13 tooth front sprocket, please help. If you can provide any part #'s or websites, I'd really appreciate it. Thanks in advance.

Brian
 

·
Registered
Joined
·
993 Posts
The outerware will make cleaning your k/n much easier, most of the time you can get away with just adding a little oil to it and just cleaning the outerware, they work well.
 

·
Premium Member
Joined
·
383 Posts
The Jet kit you can get from anywhere, depending on which one you want. I just jetted mine myself without a kit, runs great. If your going to use the slip on filter, I would suggest the outerwears. Just a safety precaution in my suggestion. For the sprockets, Sprocket Specialists has the right ones. Try Rockymountainatv.com, they have a lot of stuff.
 

·
Premium Member
Joined
·
1,055 Posts
1: Dont buy a jet kit cuz you'll just end up spending more money that way. Go to your local cycle cneter and just tell em what sizemain and pilot jet you want. They should have it for around 3 bucks a jet.

2: dont bid on those on ebay. The total price will end up a lot higher than
getting one new elsewhere. better yet there is someone on this board that works at HMF or something and he can get you a hook up on one of those silencers. You'll be happy with it. i have one on my bike and its great!

3: Order the K&N RU1770 and the outerwears for it from Hyper Racing at http://www.hyperracing.com/product.asp?prodid=88-000

4: call Sprocket Specialists at 530-533-0802 and order your 13T c/s sprocket.

5: Then go bid on your 38t sprocket on ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43981&item=2418280956 if that fails then go to
http://www.purepolaris.com/Detail.aspx?Department=ATV(PolarisPGACatalog)&Category=ATVByModel(PolarisPGACatalog)&Listing=predator500(PolarisPGACatalog)&nPage=3&nSet=1&ItemID=2874321(PolarisPGACatalog)

6: then after you do that go to http://acracing.com/site/itemdetails.cfm?ID=918&Catalog=49&sort=Pric and order your front bumper.

7: order this six pack rack at http://prm-atv.com/MN.asp?pg=products&specific=515&from=76&mfr=6

8: go order yoruslef some pro peg nerf bars at
http://acracing.com/site/itemdetails.cfm?ID=927&Catalog=49&sort=3rdcharacter

9: then go order some blue headlight lenses(cuz they look cool)
http://clear-guard.com/atvaccessory_catalog_page.asp?make=Polaris&submitButtonName=Search

10: then go order a billet bar clamp/bars at
http://www.trailtech.net/xbar_clamps.htm

11: then go to http://www.rockymountainatv.com and order some paddles and
razorbacks of your choice

12: then go order a billet thumb throttle at http

13: go to http://www.billetcreations.com/pages/10/index.htm and order a billet brake reservoir cover

14: go to http://rathracing.com/radiatorscoops.html and order their scoops.

15: buy some engine ice or water wetter from your cycle center.

16: while waiting for the **** to come remove your airbox.

17: buy some premium pump to put in your quad to test ride your new pimp mobile after all the **** is installed.

18: switch the front wheels to flip em and make your quad even wider.

19: buy some red spray paint and some clear coat. Take off the little plastic piece that covers the c/s sprocket paint the thing red to match the quad.

20: buy yourself some holeshot front tires.

21: wait for all the **** to come some more.

22: take it all to the garage once you receive it all and install all the ****. You'll be happy:)
 

·
Premium Member
Joined
·
1,055 Posts
If anyone has anything to add to it then feel free to add to the list. The list goes on:)
 

·
Registered
Joined
·
394 Posts
You can get the pro pegs for like 70 bucks cheaper at www.atvparts.biz the are $215 compared to ac's $289.nThe billet clamp and bars will also be cheaper at rocky mounatin. Just trying to save this poor little fella some money because his credit card is going to be maxed out after your list but he will that you later.
 
1 - 6 of 6 Posts
Top