Polaris Riders Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
I need some good references to where I can get a larger carb, engine mods, and I want to know if there is a divice that I can get that will force air into my motor instead of suck. I don't know what that "AirForce" kit is that you guys keep talking about. Fill me in on mods that I can get to make me faster. I have already lowered a front sprocket for MX, White Brothers slip-on, K&N air filter, removed airbox snorkle, and cut a massive hole in my box. I'm looking for like a turbo charger or fan that will force air in the motor, high compression piston, and hot/high rev cam-shafts. I know Rath Racing is in the making of all that but they take too long. I also wanted to know if any of you have ran higher octaine and felt a difference. Info Info Info please! I'm desparate to eat up every quad on the MX track including 250r's and I need more power to get the holeshot on Banshee's and 250r's. Thanks!
 

·
Registered
Joined
·
1,103 Posts
I guess Superbike shops has some stuff ready. Also HPD is very aggressively modding this motor. They have a Predator totally torn down....and I do mean totally. Hot Seat also has some gears turning. It's gonna take some time because these places really like to put some testing seat time in. Reliability is what it's all about...along with horsepower.
 

·
Registered
Joined
·
101 Posts
I have the airforce kit and it makes a huge difference. You must cut a hole in the back of your airbox, and another one right under the seat. They have metal brackets that mount over the holes and you slip foam filters in there. There is also some carb work that needs to be done, i sent mine there and they did it for free. That airforce kit with the white brothers pipe and a 39t rear sprocket cost me around $350.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #4
Hmm... Does that "Air-Force" kit force air into your motor or not?
 

·
Registered
Joined
·
118 Posts
Why don't you stick your hair dryer into your air box...that will force air into the carb...That alone will add 27hp. Then take the turbo off of your mom's Nissan...mount it to your 13 tooth sprocket and that too will add about 12hp. Hmmmm...lets us know how it goes.
 

·
Premium Member
Joined
·
397 Posts
lol....
 

·
Premium Member
Joined
·
1,055 Posts
Hey just go and get one of those little handheld AA battery powered fans and put it in the air intake tube and turn it on whenever you go for a ride. That will force air in.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #9
That still did not answer my question.
 

·
Registered
Joined
·
343 Posts
No it doesnt force air in.

The only way your gonna get that to happen is if you install a TURBO CHARGER or a SUPER CHARGER. I dont think they make superchargers for quads since they have to run off of belts..so your limited to a turbo. They'll make some MAJOR HP..but you gotta mod to keep up wiht the turbo..
 

·
Premium Member
Joined
·
1,055 Posts
There are a couple of shops that do turbo's for quads. You might want to try talking them into doing one for you. Here are their site links:
http://www.quadshopatv.com/turbo%20raptor.htm or
http://www.paatving.com/Articles/turboraptor/feature/turboraptor.asp
 

·
Registered
Joined
·
27 Posts
Discussion Starter #13
Does anyone know if there are header pipes out for the Predator yet? I know Big Gun makes a full system but I need something that will fit my White Brothers slip-on. If you guys see or hear about anymore "Performance" accessories please let me know.
 
1 - 13 of 13 Posts
Top