[shiftinraptors]

I know this isn't asked too much, but what can I do to make my predator run more MPH's??? I know if I put a 36 tooth sprocket on the back, with the 14 tooth on the front, that's put the ratio at 2.57, so that would give me a little more over the stock 2.64 ratio. I'm changing to the WB slip on pipe, putting the K&N slip on it, and I'm going to rejet the carb. Where I live, the land is flat, and the roads are very open and rarely traveled. Just playing around one weekend, I'd like to see what I can get up to. Right now, I can pull out on the highway behind cars going 65, ride up on them and pass with stock gearing and stock everything else. What kind of speed could I get? One guy said his was clocked at 76 by GPS of a stock predator. Could I get maybe 85 or 90? that'd be cool ****. There's some local punks in town that thing they have some bad asss cars they race at a 1/4 mile strip a few miles out of town. I'd really like to roll up have them see nothing but tail lights on my predator. Any info would be appreciated. For actual riding I think I'm going to go with the 13/38 combo. thanks

Brian

 

[rngmstr]

If you planning to go 1/4, you will definetely need to gear it different, I would try a 16 in front if it is available and see what that gets you, then work from there.

 

[rngmstr]

If you planning to go 1/4, you will definetely need to gear it different, I would try a 16 in front if it is available and see what that gets you, then work from there. We have gotton into the 10's on the banshees, hoping to get a 6.60 1/8 by the end of the summer.

 

[shiftinraptors]

Will a 16 tooth even fit on a predator?

 

[cmc72_2000]

it may rub case saver