[bassman]

I have never worked on a mikuni carb only keihin on hondas. how do you change the jet. I assume it on the bottom, like all other carbs. these screws are sooo tight though. Am I headed down the right road? thanks

 

[modquad]

A little trick, get a small Vise-grip to break them loose. I think JJ or Localbuzz originally posted about changing those soft screws out for some allen head units too. You're on the right track, remove the bowl, and you'll see it.

 

[tom6929]

te sizes are 4mm by 10mm for the float bowl on bottom of carb.

 

[powerslider]

An impact screwdriver will easily loosen those screws with just a couple taps, mine still look new.