[warning]

when your greeseing it do you just greese the top of it or do you have to like take the part off and greese in the middle of it to ? thanks for the information .

 

[predator03]

It would help if you were more specific about what you are talking about. There are a handfull of grease zerks on the machine. Just grease them till you see the grease start to come out past the bushings. Does that help?

Scott

 

[razorglare]

There is one greese nipple right up by the middle of the handle bars, very hard to get to but it's there. THen the rest are on the A-Arms upper and lower and the Swing arm in the back. There are 6 total I think. 4 on a-arms, 1 on swings arm and the one by the handle bars.

 

[warning]

razor glare thats correct now i just have to greese the top of the them and thats it right ?

 

[razorglare]

You have to push the greese gun tip so it locks onto the greese nipple. If when you greese and the greese comes out around the nipple you don't have the tip on the nipple all the way. The greese should come out at the end's of the connector joints.