Polaris Riders Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
My front seems loose going into turns. I have pulled on the wheels and nothing seems loose. Any ideas on this? Anyone else feel like their pred wanders up front and gets loose in turns?
 

·
Registered
Joined
·
1,935 Posts
look into all the posts about ball joints
 

·
Registered
Joined
·
93 Posts
Talk to your dealer. Polaris is well aware of the ball joint problems. I had mine replaced under warranty. You shouldn't have any problems either.

Now if they could address the crappy brake bracket problem, I'd be even happier.
 

·
Registered
Joined
·
1,935 Posts
what brake bracket problem are you talking of? hadnt heard that one
 

·
Registered
Joined
·
93 Posts
The bracket bounces around, and it got wallowed out, where it goes around the bearing carrier. It's more of a nusiance than anything I suppose. But I am disappointed in that one thing. Guess I gotta live with it. I've already had it replaced, and the new one lasted two weeks until it was bad. I can't believe it's only happened to a couple of us.
 

·
Registered
Joined
·
525 Posts
Do you have rezzies on the front. I think without them this mach steers like a pos. The front was way to stiff for me, bouncing up and down not getting a bite into the turns. Rezzies are one of the first mods I would do.

later
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #7 ·
I actually have elkas on it with piggy backs.
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #8 ·
checked all ball joints and they don't seem to move. I'm going to try a softer spring on my shocks and see what that does.
 
1 - 8 of 8 Posts
Top