Polaris Riders Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
315 Posts
Discussion Starter · #1 ·
During my ride today I noticed that my chain got tighter as the ride went on. Anyone know the cause/fix? I havent looked at it closely yet. You'd think it would be the swingarm bolt. Chain roller is also making more noise. Please help. Thanks, Rob
 

· Registered
Joined
·
3,904 Posts
check out the thread I posted onto titled"Help.... please..." you may find this helpful,Im finding more and more people are having this issue and we solved it very easily.......:) TINA
 

· Registered
Joined
·
3,904 Posts
Not sure this is of any help, but maybe some of your sounds you are hearing....just a thought......
 

· Registered
Joined
·
315 Posts
Discussion Starter · #4 ·
So you guys are saying that the bolts are too tight? That would might make the chain come loose not tight right?
 

· Registered
Joined
·
92 Posts
When I adjusted my chain i had to roll it forward to tighten it up, so I would say it's probable the carrier twisted forward causing your chain to tighten up.
 

· Registered
Joined
·
315 Posts
Discussion Starter · #6 ·
I found the problem. I must have hit something hard enough to shift my swingarm skid plate so that it was pressing against the chain. It made it super tight. All is better.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top