Polaris Riders Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
149 Posts
Discussion Starter · #1 ·
I DO ALOT OF NIGHT RIDING AND FINE THE HEADLIGTS POOR. THE WATT OUT PUT OF THE ALT. IS LOW AND NOT MUCH ROOM FOR EXTRA LIGHTS REQUIRING BIG WATTS. I FIXED MY PROBLEM BY INSTALLING AN LED TAIL LIGHT LOWER MORE WATT'S BY OUT 25WATTS.
AND INSTALLED TWO 50WATT 160,000 CANDLE POWER ONES. CUT THE HIGH BEAM WIRE AND WIRED THE TOO MY STOCK HIGH BEAM SO THERE THE ONLY ONES ON WITH THE HIGH BEAMS.

THE OVERALL DIFFERENCES IS BEFORE 3RD GEAR WAS A HARD GO WAS UNSAFE
NOW 4TH FULL OUT AND LOTS OF LIGHT TO SPARES
 

· Registered
Joined
·
44 Posts
Here's an idea... Get you 2 mag lights from Wal-Mart and make you some clamps out of sheet metal. Put the mag lights on the sides of your helmet and screw them down. haha, just kidding man. I actually thought the lights were really good, 10 times better than our old Honda 300 4x4. I try to stay incognito when I'm riding, I rigged a switch to cut the power totally to my tail light. What the cops can't see, they can not follow. Peace
 

· Registered
Joined
·
46 Posts
Ummm...The stator in the Pred. is a 200 watt one. That is awesome power amongst today's atvs. Get a set of HID's from TrailTech and you'll be set.
 

· Registered
Joined
·
190 Posts
I have been running one hella 500 55w driving lamp. Works very well, see picture in my profile
 

· Registered
Joined
·
1,103 Posts
All very good ideas....cept for da Maglite deal (Streamlight Stingers baby!) hehe. Trail Tech and Ricky Stator are both top notch people to work with. They'll have you range finding mosquitos at 1,000 yards. :D
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top