Polaris Riders Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
171 Posts
Discussion Starter · #1 ·
Hi,I took my bike to the dealers the other day because the boots on the ball joints were loose.He told me that I didn't need new ball joints and that the one's that were comming loose (the rubber was comming apart from the metal)could be fixed and he superglued them together again and it worked just fine.He cleaned the dirt and debris from it put a dab of grease in them and superglued them back together.So guy's keep an eye out for those boots comming apart and you can catch it before they go bad by cleaning them and superglueing them together again
 

· Registered
Joined
·
455 Posts
Nada. If the boots break, get new ones. The boots shouldnt break there seals at all. I just had my replaced because of it. Two out of the four brand new ones are also leaking grease, they are getting replaced again soon.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top