Polaris Riders Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I’m having trouble with my clutch master cylinder seems like I’m losing pressure I pull the clutch handle in and it still stays in gear but not all the way. Disengages the transmission but not 100% I just bought a new master cylinder I bled it and back bled it but I’m still having the same issue loosing its prime If I pump the handle that seems to be OK but the faster I go the more it seems like it’s stuck in gear and won’t disengage when riding and it gets hot
 

·
Registered
2008 Polaris Outlaw 525 IRS
Joined
·
7 Posts
What I had to do is get another slave cylinder. I had the same problem, when it gets hot it doesn't disengage or anything like that. I had to do the slave cylinder, and the master cylinder (the one on the handle bars) however it could just be a line or something. Also the master cylinder on mine had a huge leak and had the o ring all worn down. So basically just check the slave, and that should be OK. Hope this helps!
 
1 - 2 of 2 Posts
Top