Polaris Riders Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
156 Posts
Discussion Starter · #1 ·
What kind of difference does it do, how much speed do you lose?
Thanks in advance.
 

· Registered
Joined
·
839 Posts
It is roughly the same a dropping the countershaft sprocket to a 13. You will lose some top speed but it will accelerate faster.
 

· Registered
Joined
·
95 Posts
18"tires are good for mx track,For trails put the 20" or 22 "back on.
 

· Registered
Joined
·
3,904 Posts
Ill be trying mine out this next week hopefully if My beadlocks come next we3k. I got 18inch bealock and 18 in turf tamers to try...You will lose some ground clearance but I prefer the 18 inch tire myself.....
 

· Registered
Joined
·
156 Posts
Discussion Starter · #6 ·
Anyone has a pic of a pred with 18"?
 

· Registered
Joined
·
3,904 Posts
Ill have some soon and Ill email them to you......:)
 

· Registered
Joined
·
37 Posts
Hey QuadJunkies, did you drop your wheel size also? If so, what size did you go to. If not, how did losing all that sidewall do on the mx track. I will be going down to an 18"tire but will be going to an 8" wheel. Should I do that or not?
 

· Registered
Joined
·
3,904 Posts
I have a 18 x11 8 inch rim on beadlocks..... Alot of us out here use nothing BUT 18inchers on a 8 inch rim.Depending on your track conditions in your area will decide your needs..I treid these out on my 400ex at the flattrack this wk end and I like them WAY better than my 20inchers...But I dont do MX much .The Predator will do alot of both MX and flattrack. TINA
 

· Premium Member
Joined
·
285 Posts
look at most of your top notch mx quads...they run an 18 inch tire on 8 inch rims 95% run beadlocks too...im running 18 inch mxrs on 8x8 dual beadlock hipers with integrated hubs...great setup...u save a lot of rotating mass....the hub is now integrated therefore no extra weight of a solid center on the rim and a heavy stock hub, the hub has splines which is another weight saving feature not a solid piece, and the rims are carbon fiber saving me a few there too....great setup the mxrs are fast wearing i might grab a set of grooved turfs after the mxrs **** the bed...i always liked turfs and i felt like trying the mxrs...they hook awsome but you lose so much because of the excessive wear
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top