[rudy]

Treadepot.com has Douglas Rims 10x8 3B+5N 4x156 .190. I have heard people swapping out their hubs in order to use a 10x8 rim with a 4/110 bolt pattern because they cannot get them with 4/156. Is there any reason I can't use these rims on the 4/156 pattern? Thanks.

 

[predatorkickbutt]

the rims are 10 in in diameter and 8 in wide

 

[rudy]

Thanks predatorkickbutt, do you know what people are racing MX with? It seems that 20x11x10 is too big. I have found tires that are 18x11x10. How will they work? Do people swap the rims for weight savings only?

 

[localbuzz]

If you are serious about MX racing, then get the MX 4x110 hubs from Rath Racing. This will widen the rear out to 50 inches and allow you to put an 18x10x8 rim and tire on the Predator. Put the Kenda Claw tires on it and you will be set. If you don't want to get new hubs Then run the 18x11x10 rims and tires.