Polaris Riders Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
ok. so i bought a new electric choke for the scrambler/outlaw. she will fire right up cold. once she warms she chokes herself out. i test voltage at the yellow/red wire i got nothing while running. i bought a used regulator that i thought was new. im getting no dc voltage coming out of the regulator EXCEPT to the battery to recharge it.. i mean wth is goin on.. this thing is driving me nuts. im getting about 12-13v dc coming from stator going into the regulator. i swapped the stator from a eaton 50 that had a little better readings when testing the stator.. what does the resistor do? drop voltage? also even tho i have no voltage going into the resistor when running. (back probing the y/r wire). it still get's hot... what gives.. id like to just re-route a 12v to the choke. but im pretty sure the voltage going to the choke should be about half that. right? thanks for any advice :(
 
1 - 1 of 1 Posts
Top