AMA rules for 50cc class & need tire size - Polaris Riders
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 03-08-2006, 12:41 PM Thread Starter
Member
 
Join Date: Apr 2005
Location: Urbana
Posts: 42
AMA rules for 50cc class & need tire size

I am building '99 e-ton 50cc quad for my son. He currently rides an '05 90cc predator but our local track went AMA so now he has to drop down to a 50. My question is- how wide and long can I go with this machine? It looks like in the AMA rules- I can go 41 inches both ways. I am looking at swapping out my extreme parts (+3+1 a-arms, +4 swing arm, pipe, nerf bars, etc.) Selling stock extreme since older son moved up to a Quadracer with a CR85 motor on it- wow- does that thing scream!! With all the money wrapped up in these parts, I was hoping I could use them on the e-ton frame and then move them to the predator 90 when he moves up. What size tires are people running on these? Last questions- what are people running for gears, wieghts and chain size (420)?

Right now I am at stripped frame looking at if the AC nerfs will be legal or not. Then get the paint out and trick it out!

'05 Predator 90
'03 SnoPro F7
'04 Sabercat 700
'03 500 Grand touring
'05 90 Predator frame w/50cc motor, AC nerfs, +4 axle and swingarm, +3+1 A arms, Carbon reeds, pipe, head, jug, crank, etc.
-Quad Racer with a '04 CR85 motor, alumunun nerfs, pro-taper bars, etc.....
rampolaris is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 03-08-2006, 02:36 PM
Senior Member
 
Join Date: Dec 2003
Location: laceyville
Posts: 255
How much are you looking to get for the extreme parts, also I have a ported and polished 50cc cylinder and head, the head is shaved .040 has lots of compresson. I was ruuning 19t front and 30t rear sprockets and i believe i was running 5 gram rollers.

03 predator, yoshi full exhaust, white brothers nerfs, hard rock air box mod, 165 main jet, procom cdi, 5 coils cut from spring in carberator,and slide drill out.
02 extreme machine 50 son races, full hetrick exhaust, 20 mil carb bigger reeds and reed cage,higher rev limiter, clutch springs and variable weights, and 2" wheel spacers all around.
predit is offline  
post #3 of 8 (permalink) Old 03-08-2006, 02:39 PM
Senior Member
 
Join Date: Dec 2003
Location: laceyville
Posts: 255
By the way, did you just buy that quad off ebay? I was eyeing that.

03 predator, yoshi full exhaust, white brothers nerfs, hard rock air box mod, 165 main jet, procom cdi, 5 coils cut from spring in carberator,and slide drill out.
02 extreme machine 50 son races, full hetrick exhaust, 20 mil carb bigger reeds and reed cage,higher rev limiter, clutch springs and variable weights, and 2" wheel spacers all around.
predit is offline  
post #4 of 8 (permalink) Old 03-08-2006, 04:36 PM Thread Starter
Member
 
Join Date: Apr 2005
Location: Urbana
Posts: 42
If the parts don't fit my 50 I will put them on my '05 Predator 90- he will be on that quad in a couple years. Do you have to run racing gas with your cylinder/head set up? I did buy the quadracer on e-bay. It was't as cherry as he led it to be, but it will be when I am done with it. What size tires and rims do you run on your mini?

'05 Predator 90
'03 SnoPro F7
'04 Sabercat 700
'03 500 Grand touring
'05 90 Predator frame w/50cc motor, AC nerfs, +4 axle and swingarm, +3+1 A arms, Carbon reeds, pipe, head, jug, crank, etc.
-Quad Racer with a '04 CR85 motor, alumunun nerfs, pro-taper bars, etc.....
rampolaris is offline  
post #5 of 8 (permalink) Old 03-08-2006, 10:29 PM
Senior Member
 
Join Date: May 2004
Location: Greenbush
Posts: 129
Rampolaris, just a FYI, if the aftermarket parts you have fit your Predator 90, then they will fit on you Eton 50 too, I have a 99 Eton impuls and I have stock Predator 90 arms on it, they bolted right on.

07 sponsors: Polaris Ind, Pure Polaris accessories, Rath Racing, liveglobalbid.com, viniq.com, Intercept Industries, Marcil Management
thechamp27 is offline  
post #6 of 8 (permalink) Old 03-09-2006, 01:04 PM Thread Starter
Member
 
Join Date: Apr 2005
Location: Urbana
Posts: 42
Thanks thechamp27. I have done alot of measuring between all 3 quads and the only thing different is the actual length of the parts- the mounting part looks the same (rear swing, a-arms, shocks).

'05 Predator 90
'03 SnoPro F7
'04 Sabercat 700
'03 500 Grand touring
'05 90 Predator frame w/50cc motor, AC nerfs, +4 axle and swingarm, +3+1 A arms, Carbon reeds, pipe, head, jug, crank, etc.
-Quad Racer with a '04 CR85 motor, alumunun nerfs, pro-taper bars, etc.....
rampolaris is offline  
post #7 of 8 (permalink) Old 03-09-2006, 01:09 PM
Senior Member
 
Join Date: Dec 2003
Location: laceyville
Posts: 255
I was not running race gas with the cylinder and head and it ran great. I have 19x6x10 hole shots in the front, and 18x6.5x8 snowdogs in the rear.

03 predator, yoshi full exhaust, white brothers nerfs, hard rock air box mod, 165 main jet, procom cdi, 5 coils cut from spring in carberator,and slide drill out.
02 extreme machine 50 son races, full hetrick exhaust, 20 mil carb bigger reeds and reed cage,higher rev limiter, clutch springs and variable weights, and 2" wheel spacers all around.
predit is offline  
post #8 of 8 (permalink) Old 03-09-2006, 08:01 PM
Member
 
Join Date: Apr 2004
Location: Otego
Posts: 52
Predit, are you looking to sell the cylinder and head kit ? Email me at kurtcarman418@hotmail.com

2006 DRR50, clutched,piped widened,fenders cut,MSR Handlebars,XFR Nerfs, ITP's on Douglas Wheels,high rev CDI,Rath front bumper, custom number plates, custom flamed seat cover

2004 Predator 50, extended swingarm wheel spacers, nerf bars,Fly handlebars,performance CDI,Hetrick clutch kit,Hetrick 20mm carb kit,reeds,KOSO Intake,,WRH Racing pipe, high performance coil, Uni filter , Rath front bumper, race cut front fenders, custom seat cover, oil injection removed,
mudder700 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Polaris Riders forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome