20 Amp Breaker.. Help

serge · 10-03-2006, 08:51 PM

Ok so I think i have found why my quad was stalling out of nowhere and all the light on the quad where off then came back like after one minute.

Its the breaker in the black bag near the battery. After like one minute I hear a click in it and the juice is bback again. I opened the back and its all rusted really bad! I guess it's just bad. I want to change it and was wondering what to put in its place. Like is there a general 20 Amp breaker I can buy at a local store or what???

Thanks!!!!

krazyk · 10-03-2006, 09:07 PM

I don't know how easy it will be to gea a 20a cb, but i know you could just get a inline fuse holder and wire that in, then just seal it up and always carry a couple of extra fuses w/you when you ride for the just in case.. 20a is 20a whether it be a cb or fuse.. just my .02...

vas459 · 10-03-2006, 09:33 PM

I went to Napa to replace mine. It was like $7 or so. I heard its a lot more if you go to the dealer.

serge · 10-03-2006, 09:44 PM

everything is a lot more at the dealer

bigguy6f4 · 10-04-2006, 10:54 AM

http://www.hpd-inc.com/Techtips1.htm

look here.. there is a replacement kit for that problem

serge · 10-04-2006, 01:37 PM

Thanks for the info dude!

But who will pay 30$ for a breaker?
Just bought a fuse holder with two 20AMP fuses at NAPA... 2.55$

serge · 10-04-2006, 02:30 PM

ok so I called another place and they had 30amp breaker for 5$, so I brought back the fuses and got the breaker.

Just wondering what should I do to protect the breaker...
No shrink tube is big enough and the original bag is... well thorn apart

Any idea?

predracer04 · 10-04-2006, 04:55 PM

get some of that sealing black tape that like seals together and forms 1 piece after u heat it up, kinda like shrink tube.

krazyk · 10-04-2006, 07:39 PM

what about a piece of bicycle inner tube??? just cut to length and seal the ends?? cheap and easy... never tried it but it's an idea

jeff04propred · 10-05-2006, 02:11 PM

DUCK TAPE! I just tape the black bags back together.

10-03-2006, 08:51 PM	#1 (permalink)
serge Senior Member Join Date: Dec 2005 Location: Paquetville Posts: 340	20 Amp Breaker.. Help Ok so I think i have found why my quad was stalling out of nowhere and all the light on the quad where off then came back like after one minute. Its the breaker in the black bag near the battery. After like one minute I hear a click in it and the juice is bback again. I opened the back and its all rusted really bad! I guess it's just bad. I want to change it and was wondering what to put in its place. Like is there a general 20 Amp breaker I can buy at a local store or what??? Thanks!!!! __________________ 2003 Predator / HMF Slip-on / Rath Intake w/ UNI Foam Filter and Outerwear / 175MJ, 4th Needle Clip / Armor-All on the seat (fall-off-the-bike-mod)

10-03-2006, 09:07 PM	#2 (permalink)
krazyk Senior Member Join Date: Apr 2006 Location: oak harbor Posts: 190	I don't know how easy it will be to gea a 20a cb, but i know you could just get a inline fuse holder and wire that in, then just seal it up and always carry a couple of extra fuses w/you when you ride for the just in case.. 20a is 20a whether it be a cb or fuse.. just my .02... __________________ on it's way cross country to me: 07 YFZ450 W/ some stuff SOLD: 04TLD:JE 11:1, PURE POLARIS PIPE(POLISHED), JET KIT,DG V-PRO BUMPER, PRO ARMOUR NERFS W/HEEL GUARDS(POLISHED), K&N, AIRBOX MOD,FRESH FAINT, 13T FRONT, AND HOPEFULLY MORE TO COME.

10-03-2006, 09:33 PM	#3 (permalink)
vas459 Member Join Date: Jun 2004 Location: Lake Como Posts: 33	I went to Napa to replace mine. It was like $7 or so. I heard its a lot more if you go to the dealer. __________________ 04 Predator TLD, PP nerfs, PP shrouds, Trail Tech comp., IMS Intimidator bumper, Denton Stabilizer, Trail Tech clamp and X bars.

10-03-2006, 09:44 PM	#4 (permalink)
serge Senior Member Join Date: Dec 2005 Location: Paquetville Posts: 340	everything is a lot more at the dealer __________________ 2003 Predator / HMF Slip-on / Rath Intake w/ UNI Foam Filter and Outerwear / 175MJ, 4th Needle Clip / Armor-All on the seat (fall-off-the-bike-mod)

10-04-2006, 10:54 AM	#5 (permalink)
bigguy6f4 Senior Member Join Date: Mar 2005 Location: Lone Star, Tx Posts: 647	http://www.hpd-inc.com/Techtips1.htm look here.. there is a replacement kit for that problem __________________ 2005 TLD. Black Metalic Plastics, Hpd 558, 12.5 Piston, Torque Cams, Port and Polish Head with 5 angle valve job, Hmf Slip-on, Nick carb and race mod. Procom Rectifier. Hpd Lightened Flywheel. Twin air with outerwears. Ceramic Coated stock header. 110 race gas and 93 mixed 50/50. 14-38 gearing

10-04-2006, 01:37 PM	#6 (permalink)
serge Senior Member Join Date: Dec 2005 Location: Paquetville Posts: 340	Thanks for the info dude! But who will pay 30$ for a breaker? Just bought a fuse holder with two 20AMP fuses at NAPA... 2.55$ __________________ 2003 Predator / HMF Slip-on / Rath Intake w/ UNI Foam Filter and Outerwear / 175MJ, 4th Needle Clip / Armor-All on the seat (fall-off-the-bike-mod)

10-04-2006, 02:30 PM	#7 (permalink)
serge Senior Member Join Date: Dec 2005 Location: Paquetville Posts: 340	ok so I called another place and they had 30amp breaker for 5$, so I brought back the fuses and got the breaker. Just wondering what should I do to protect the breaker... No shrink tube is big enough and the original bag is... well thorn apart Any idea? __________________ 2003 Predator / HMF Slip-on / Rath Intake w/ UNI Foam Filter and Outerwear / 175MJ, 4th Needle Clip / Armor-All on the seat (fall-off-the-bike-mod)

10-04-2006, 04:55 PM	#8 (permalink)
predracer04 Senior Member Join Date: Mar 2006 Location: Baraboo Posts: 2,488	get some of that sealing black tape that like seals together and forms 1 piece after u heat it up, kinda like shrink tube. __________________ Im KYLE 04' STD, FMF Titanium4, Jetted, 15t front sprocket, Pro Armor Kill Switch, desert grab bar, spider slt grips, longhorn grip doughnuts, thumper 20w-50, adjusted suspension, rath intake, full flight a arms. Mikuni 170 mj, 3 turns out on a/f screw, 1 position down on needle.

10-04-2006, 07:39 PM	#9 (permalink)
krazyk Senior Member Join Date: Apr 2006 Location: oak harbor Posts: 190	what about a piece of bicycle inner tube??? just cut to length and seal the ends?? cheap and easy... never tried it but it's an idea __________________ on it's way cross country to me: 07 YFZ450 W/ some stuff SOLD: 04TLD:JE 11:1, PURE POLARIS PIPE(POLISHED), JET KIT,DG V-PRO BUMPER, PRO ARMOUR NERFS W/HEEL GUARDS(POLISHED), K&N, AIRBOX MOD,FRESH FAINT, 13T FRONT, AND HOPEFULLY MORE TO COME.

10-05-2006, 02:11 PM	#10 (permalink)
jeff04propred Member Join Date: Nov 2005 Location: Fairfax Posts: 75	DUCK TAPE! I just tape the black bags back together. __________________ 04 PRED/ DG Race exhaust/ Civic intake/ Bergard steering stem & clamp/ Tag X5 bars/ Rath bumper/ Tusk nerfs/ .190 douglas wheels/ Maxxis razr 2/ Race cut fenders/